Welcome to Shenzhen Powerlink electronic technology co.,ltd
16E1+10/100/1000M PDH Fiber Optical Multiplexers Singlemode Dual Fiber 20KM 19 Inch Rack(with the orderwire phone)
  • 16E1+10/100/1000M PDH Fiber Optical Multiplexers Singlemode Dual Fiber 20KM 19 Inch Rack(with the orderwire phone)
16E1+10/100/1000M PDH Fiber Optical Multiplexers Singlemode Dual Fiber 20KM 19 Inch Rack(with the orderwire phone)
¡¾Brief ¡¿£º
¡¾Series¡¿£ºPDH/SDH Multiplexers
Description

16E1+10/100/1000M PDH Fiber Optical Multiplexers Singlemode Dual Fiber 20KM 19 Inch Rack(with the orderwire phone)


1-16E1 Fiber Optical Multiplexer is a kind of fiber-optic communication device which can use fiber to transport 1~16 E1 signal in the meantime efficiently and can test the used E1 automatically. The flexible circuit test and the indication function has a simple single panel form, which provides 10M/100M/1000M Ethernet ports(optional) and an office phone port (optional), raising applied flexibility also in the meantime enlarge the utilization of the fiber optic.

Product description

16E1+GE PDH fiber optical Mux, is a point-to-point optical transmission equipment developed based on ultra large scale integrated circuit. It has perfect alarm function, 1 channel digital service telephone and 1 channel GE Ethernet port. 16 channel Ethernet port set as switch and dividing VLAN as well. Ethernet transmission rate is 10/100/1000M auto adapted. The device's electronic part is total digital circuit, to assure working steady, low power consumption, high integration and easy maintain.
 
Product character

(1) Based on self-independent knowledge circuit;
(2)Veneer design;
(2) Module style, wide dynamic detector;
(3) Optical module adopt send-receive synchronous way;
(4) Provide control remote alarm status;
(5) E1 interface accord with G.703, adopt digital clock reset and flat lock technique;
(6) Provide 16 channel E1 and 1 channel 1000M Ethernet transmission loading;
(7) 16 channel Ethernet port set as switch, also can be divided VLAN;
(8) Ethernet interface 10/100/1000M auto adapted;
(9) 1 channel PCM digital service telephone (for option);
(10) 2 channel RS232 for option;
(11) Support 1+1 fiber optical interface backup;£¨optional£©
(12) Desktop device support independent SNMP, and link control (optional)
(13) Support detecting optical signal loss caused by remote device's turn off or fiber's break down;
(14) Inspect local device's temperature and voltage;
(15) Inspect remote device's temperature and voltage and set temperature alarming value;
(16) Transmission distance can reach 2~120km without relay;
(17) Multiple power supply type for option: AC220V,DC-48V/DC24V etc;
(18) DC48v/DC24v has no positive and negative difference;
(19) Head end support chassis with multiple cards, 12 channel optical way for option, SNMP included.
 
Technical Parameter
 Fiber optical interface
  optical wavelength: 850/1310nm for multi-mode fiber, 1310/1550nm for single-mode fiber.
  optical interface: SC/FC/ST
  Fiber pinning: double and single for option
  transceiver module: >-6dBm
  optical receiver sensitivity<-36£¨BER<10-11 £©
  receive range: >-30dB
  transmission distance: multi-mode 2 Km, single-mode 40 Km, single-mode 80 Km, single-mode 120 Km.
  Optical circuit coding: NRZ
 
  E1 interface  
  Interface Rate: 2.048Mbps+-50PPM
  Coding: HDB3
  Interface signal coding: ITU-T G.703
  E1 Impedance : BNC 75¦¸(unbalance), RJ45 120¦¸(balance)
  Unbalanced coaxial cable connector: 75-2/3 coaxial cable adapted
  Interface character: match G.703
  Jitter tolerance : match G.742 and G.823.
  Input attenuation tolerance:0~6dBm
  
 Ethernet interface 
  Interface Rate: 10/100/1000Mbps auto adapted, full/semi duplex auto adapted
  Interface character: match IEEE802.3, IEEE802.1 Q
  Mac address: can learn 4096 MAC addresses
  Connector: RJ45, Auto-MDIX
 
Dimension
485 mm£¨L£©¡Á140 mm£¨W£©¡Á 44 mm£¨H£©
 
Pre£º4E1 PDH Fiber Optical Multiplexers Singlemode Dual Fiber 20KM 19 Inch Rack
Next£º4E1+4*10/100M PDH Fiber Optical Multiplexers Singlemode Dual Fiber 20KM 19 Inch Rack(with the orderwire phone)
Links
  • 2
  • 1
About us
Company Profile
Company Culture
Case
Case Categories 1
Case Categories 2
Case Categories 3
Case Categories 4
Case Categories 5
Products
WDM Optical Network
Fiber Optic Transceivers
Network Media Conversion
Fiber optic cable
Fiber Patch Cord&Pigtails
Cables Management
Contact us
Tel£º86-755-33160443/33561801/1802
Fax£º86-755-22142476
E-mail£ºinfo@powerlinksz.com,info@wangtongchina.com
Address£ºFactory 1:4Floor,Buliding B,HengMingZhu Industrail park , 2nd Road QuanJin,GuShu ,Bao An District.,Shenzhen,GuangDong,China/Factory 2:6 floor ,c4 building ,meihuamei industrail part ,guangming dist.,Shenzhen, Guangdong, China