Welcome to Shenzhen Powerlink electronic technology co.,ltd
1X2 1310nm Polarization Maintaining Fiber Optical Circulator
  • 1X2 1310nm Polarization Maintaining Fiber Optical Circulator
1X2 1310nm Polarization Maintaining Fiber Optical Circulator
‐Brief /
‐Series/Fiber optical circulator
Description

1X2 1310nm Polarization Maintaining Fiber Optical Circulator

Powerlink¨s Polarization-Maintaining (PM) Optic Circulators are non-reciprocating, unidirectional, three-port devices that are used in a wide range of optical setups. Available with a center wavelength of 1064, 1310 (O-Band), or 1550 nm (C-Band), these circulators are designed to work with light that is launched into the slow axis.
Choose from versions with no connectors, FC/ST/SC/LC PC&APC connectors and so on.
Characteristics
Low Back Reflection
High Extinction Ratio
Low Insertion Loss
High Return Loss
Excellent environmental stability and reliability
Applications
DWDM system
Add-Drop Multiplexing
Fiber Amplifier
Fiber Sensor
Chromatic Dispersion Compensation Devices
Fiber Bragg Grating
Polarization maintaining optical system

Application Diagram
Fs Polarization Maintaining Optical Circulator Application-1.jpg As the picture shows: The input DWDM channels are coupled into Port 1 of the device with a FBG device connected to Port 2. The single wavelength reflected from the FBG then reenters the Circulator in Port 2 and is routed accordingly to Port 3. The remaining signals pass through the FBG and exit on the top fiber.
Circulator used to drop an optical channel from a DWDM system using a Fiber Bragg Grating.
Fs Polarization Maintaining Optical Circulator Application-2.jpg As the picture shows: A Circulator is located at both ends of the fiber. Each Circulator functions to add a signal in one direction while removing the signal in the other.
Circulator can be used to send optical signals through a single fiber in two directions.
Dimension
Fs 3 ports-Polarization Maintaining Optical Circulator.jpg
Order Information
Product Description(PMCIR) Port Type Stage Operating
Wavelength
Pigtail Type Fiber Type Connector Type Fiber Length
P=Polarization
M=Maintaining
CIR=Circulator
1X2
2X2
Dual
Single
1064nm
1310nm
1550nm
250um
900um
PM98
PM15
PM13
others
None
FC UPC/APC
LC UPC/APC
SC UPC/APC
ST UPC/APC
0.5m
0.8m
1.0m
1.2m
Custom
Note:
1. Operating Wavelength: Powerlink can customize any other wavelengths according to your requirement.
2. Length: The default length for the cable is 1M, Powerlink could also provide 0.5M,0.8M,1.5M, 2.0M, etc.


Pre1X2 1310nm Polarization Maintaining Fiber Optical Circulator
Next10W 980nm High Power Fiber optic Isolator
Links
  • 2
  • 1
About us
Company Profile
Company Culture
Case
Case Categories 1
Case Categories 2
Case Categories 3
Case Categories 4
Case Categories 5
Products
WDM Optical Network
Fiber Optic Transceivers
Network Media Conversion
Fiber optic cable
Fiber Patch Cord&Pigtails
Cables Management
Contact us
Tel86-755-33160443/33561801/1802
Fax86-755-22142476
E-mailinfo@powerlinksz.com,info@wangtongchina.com
AddressFactory 1:4Floor,Buliding B,HengMingZhu Industrail park , 2nd Road QuanJin,GuShu ,Bao An District.,Shenzhen,GuangDong,China/Factory 2:6 floor ,c4 building ,meihuamei industrail part ,guangming dist.,Shenzhen, Guangdong, China