Welcome to Shenzhen Powerlink Electronic Technology Co.,Ltd
40 channels Duplex DWDM AAWG Mux Demux C21 to C60 3dB Insertion Loss with Monitor Port
  • 40 channels Duplex DWDM AAWG Mux Demux C21 to C60 3dB Insertion Loss with Monitor Port
40 channels Duplex DWDM AAWG Mux Demux C21 to C60 3dB Insertion Loss with Monitor Port
‐Brief /
Multiplexer (MUX) and demultiplexer (DEMUX) are combined together into a single piece of equipment for bi-directional data transmission over two fibers.
Fs Three-types-transmission-way-for-Fiberstore-DWDM-MUX-DEMUX-Duplex-BIDI.jpg
‐Series/DWDM MUX DEMUX
Description
DWDM Mux/Demux modules are part of a series of high performance products based on silica-on-silicon planar technology. The AWG chips Powerlink used for DWDM Mux/Demux are targeted for Long-Haul, Metro and access applications, where outstanding optical performance and low cost are paramount.
Athermal Arrayed Waveguide Grating (AAWG) DWDM Modules features of athermal packaging design require no electrical power, software or temperature control.
Thermal Arrayed Waveguide Grating (TAWG) DWDM Modules are designed for use within the C-band release of DWDM system. To decrease the power dissipation of the devices in different environmental conditions, the AWG package is special designed with selection of reliable thermal plastic with low thermal conduction, and the AWG operating temperature is controlled by using foil resist heater or Peltier TEC with thermistor temperature sensor.
The channel spacing for DWDM is 1.6/0.8/0.4 nm (200GHz/100 GHz/50 GHz grid). This small channel spacing allows to transmit simultaneously much more information.
Front Panel Details




 
A
Common port:
LC, SC, ST and FC connectors available.
B
Mux/Demux port for specific ITU-Grid channels:
LC, SC, ST and FC connectors available.
C
Monitor port:
Connects measurement/monitoring equipment, such as power meters or network analyzers, to the module outputs. When finished monitoring, disconnect the instruments and the network is left undisturbed
LC, SC, ST and FC connectors available.
Tap percentage is 5% as default, 1%, 2%, 3%, or 10% available on request.
Express port & Standard port 1310nm are also available.

Note: Actual layout depends on the chosen connector type as well as other factors. However, the principal scheme stays the same.
Item Details
40 channels DWDM mux and demux in one 1U Rack
The channel spacing for DWDM is 0.8 nm (100 GHz grid).
Com port is duplex
1U 19inch Rack Mount Housing
Protocol transparent (10 Mbps to 100 Gbps)
Distance: Up to 80 km depending on power budget of user equipment
Low insertion loss
Excellent channel isolation
Epoxy-free optical path
Compliant to ITU-T G.657A1 standard.
ISO 9001 manufacturing facility
Pre8 channels, ABS Pigtailed Module, Simplex Uni-directional, CWDM Demux
Next12 channels, Type A, Pigtailed Module, Simplex BIDI, Athermal AWG, DWDM Mux & Demux
Links
  • 2
  • 1
About us
Company Profile
Case
Case Categories 1
Case Categories 2
Case Categories 3
Case Categories 4
Case Categories 5
Products
WDM Optical Network
Fiber Optic Transceivers
Network Media Conversion
Fiber optic cable
Fiber Patch Cord&Pigtails
Cables Management
Contact us
Tel86-755-33160443/33561801/1802
Fax86-755-22142476
E-mailinfo@powerlinksz.com,info@wangtongchina.com,info@guangtongchina.com
AddressFloor 5, Bulding A , Rongxun High-tech Industrail Park, Qinghu Community, LongHua District, ShenZhen(518109)